The **Nitecore P20UV V2** is a powerful flashlight with a maximum output of 1000 lumens. With a beam distance of 164 meters the Nitecore P20UV V2 is perfect for law enforcement, security and daily use in rough circumstances. This hulk is enhanced with four UV LED lights. Great for inspections, forensic research, gemological research and checking authenticity features on money and passports. The housing on the flashlight is made from the ceramic material called silicon nitride. As such it is perfect for breaking glass. The Nitecore P20UV V2 can handle a 1 metre fall and is waterproof up to a depth of 2 metres. In addition, this flashlight is enhanced with reverse polarity protection with “anti-impact” functionality, which makes it ideal for shooting sports.
## How to use the Nitecore P20UV V2
This rechargeable flashlight is enhanced with a CREE XP-L2 V6 LED light with a life of 50.000 hours! The OP-reflector in the Nitecore P20UV V2 provides you with a bread, even beam. The back of the light contains two switches. One is the tactical switch. The other is the mode switch and is easily to control, even while wearing gloves. Bu pressing the mode switch you immediately activate the stroboscope mode. The flashlight is enhanced with three different user modes: tactical, law enforcement and general. Each with their own presets for the available light modes. As such this flashlight can handle it own in almost any situation.
### Light modes for the Nitecore P20UV V2
The Nitecore P20UV V2 is enhanced with different light modes with the following lumens:
* High: 1000 lumens, burn time of approx. 2 hours and 30 minutes
* Medium mode 3: 330 lumens or 180 lumens (depending on the battery), burn time of approx. 7 hours
* Medium mode 2: 180 lumens, burn time of approx. 16 hours
* Low: 60 lumens, burn time of approx. 46 hours
* UV: 320 megawatts, 365 nano metres, burn time of approx. 27 hours
* Strobe: 1000 lumens
## Accessories for the Nitecore P20UV V2
The Nitecore N20UV V2 comes with a tactical holster (NTH10), pocket clip, wrist strap, spare o-ring and a holder for 18650/CR123 batteries. This flashlight can be used with a rechargeable 18650 battery (2300 mAh, 2.7V PCB protected) or with 2x CR123 or 2x RCR123 batteries.
Reviews
There are no reviews yet.