The **KMFS RIVAL Diamond Stealth** is a simple and accurate sharpening system from the Czech Republic. It is a solid sharpening system made from one piece of aluminium. This makes the system lightweight, but also very rigid and therefore very precise. The black coating, in addition to looking cool, offers protection against corrosion. This sharpening system makes it super easy to adjust the sharpening angle. Turn one of the adjusting screws to change the sharpening angle. It couldn’t be simpler!
## This set contains:
* **KMFS RIVAL sharpening system**
* **Two sharpening stone holders**
* **C-clamp**
* **Allen key**
* **Angle meter**
* **Carry case**
* **6 diamond-coated sharpening stones:**
* 2x diamond-coated sharpening stone 240 grit
* 2x diamond-coated sharpening stone 600 grit
* 2x diamond-coated sharpening stone 1000 grit
## KMFS setup and sharpening stones
With the supplied C-clamp you can securely attach the sharpening system to your desk, dining table or workbench that has a minimum thickness of 1 cm and maximum thickness of 4 cm. Place the sharpening stone holder on the system and choose the correct sharpening stone. The 240 grit diamond-coated sharpening stone is a coarse sharpening stone for repairing a blunt or damaged blade. It gives the knife the correct sharpening angle. The 600 grit diamond-coated sharpening stone removes the deep scratches from the 240 grit diamond-coated stone, making the knife a lot sharper. This grit size is also suitable if your knife isn’t very blunt yet, but could do with sharpening. With the 1000 grit, you remove the scratches from the previous sharpening stone for an even sharper result. You also use this grit size to keep your knives sharp.
## KMFS clamp
The clamp of this sharpening system is simple, yet ingenious. Loosen both screws with the supplied Allen key and place the blade in the clamp. Then tighten the top screw. Now loosen the bottom screw. This screw presses on the inside against the bottom of the clamp. This really clamps the knife firmly in place.
## KMFS sharpening angle
You can adjust the sharpening angle by turning one of the two rotary knobs. The rotary knobs make an audible click so you know how many increments you have gone. Each click is an increment of 1.5 mm. The horizontal screw thread is connected so that you sharpen at the same angle on both sides. The sharpening system has no specific minimum or maximum sharpening angle. This really depends on the height of the blade of your knife. An angle meter is included to help you find the right sharpening angle. This metal plate indicates a total sharpening angle of 30 to 45 degrees. The manual for the system explains exactly how this works. For more tips on determining and viewing sharpening angles, we recommend reading the following article: [the sense — and nonsense — of sharpening angles](/en/ct/sharpening-angles-explained.htm).
Reviews
There are no reviews yet.